Angry Space Invader DUAL JOY by Lotharek

96.00  Tax included




Description

Angry Space Invader DUAL JOY

Hardware, manuals, FAQ, and other info on manufacturers website – HERE

Dual joystick interface for ZX and compatible ( Doesn’t work with Timex 2048 )

Features:

  • Kempston Joystick interface mode
  • Sinclair Joystick interface mode (interface1/2)
  • Protek Joystick interface mode (since last firmware)
  • Reset switch
  • fully passthrough – you can connect any device that uses a ZX Edge connector.
  • Joystick indicator LED – joystick tester
  • build upon Atf1502 CPLD
  • transparent case with rubber stands made at my laser machine
  • jumperless configurable mode of joystick port A

Configuration:

Configuration is done via joystick`s movement at ASI RESET / COMPUTER POWER ON:

PRESENT RELEASE FIRMWARE (available at download tab)

  • SINCLAIR2 MODE (ONLY FOR JOY port1) – to switch the joystick port to SINCLAIR2 mode, move the joystick and hold UP/DOWN  and press tact switch. To return to KEMPSTON MODE – press the TACT switch with no joystick action

 

  • PROTEK MODE (ONLY FOR JOY port1) – to switch joystick port to PROTEK MODE mode, move the joystick and hold LEFT /RIGHT, and press tact switch. To return to KEMPSTON MODE – press the TACT switch with no joystick action

  • KEMPSTON MODE– always default state ( after power on or reset)
  • ANGRY LEDS: to disable ANGRY SPACE INVADER LEDs, press and hold FIRE1 or FIRE2 and press tact switch.
  • Joy port2 is always mapped to SINCLAIR 1 interface, know from Zx128+2 (1,2,3,4,5 for left, right, up, down, and fire)
  • RESET – tact switch;  Resets CPLD and ZX SPECTRUM/

 

FIRST RELEASE FIRMWARE:

  • FIRE1/FIRE 2 – Disable Angry Space Invader Leds ( default ON)
  • NO MOVEMENT- ( default) Kempston mode at joystick port 1(A); Port 31 (#1F) and only A5=0 decoding is done
  • JOY1_DOWN – Kempston mode at joystick port 1(A) with A5, A6, A7 decoding
  • JOY1_UP – Kempston mode at joystick port 1(A) with A0-A7 port decoding
  • JOY1_LEFT or JOY RIGHT – Enables SINCLAIR1 interface at port A (keys mapped 1,2,3,4,5)

 

Additional information

Weight 0.2 kg