Switchable DSP Clock for Atari Falcon
Many musicians were complaining about cross-developing music for Falcon. This gave birth to this neat external device.
With a device plugged in, you can switch between 3 positions: 44,1/std/48 – respectively 44.1KHz / original clock / 48KHz.
The switch is located at the back, and is secured against accidental switching.
Switching is fully electronic. The mechanic switch is used only to control the electronics.
It’s safe to switch when the Falcon is powered ON.
In the worst case, if switching when DSP is running you will get a DSP timeout error.
Relevant thread on forums -> HERE